Parexgroup provides professionals of the sector a constructive solution for waterproofing and subsequent ceramic tiling in shower trays. This article reviews application process and set of products that will help this process to be faster and more efficient, eliminating dampness.
Application Process
Aadnsjhdsjhdjashd
Initially, the shower tray has to be removed if you want to replace it with ceramic tile, leaving a healthy and rough surface free of grease, oil, dust and loose particles. Once we have a stable, clean and resistant support, 221 LANKOIMPER CAPA GRUESA will be used, a waterproofing mortar in thick layer with extended working time. With this product, we will make half round on the perimeter in order to tensions that occur in the walls and floors meet, and re-grow the ground while we slope toward the sink.
Next step is to seal the sink properly, in order to prevent future leaks. To accomplish this, 534 LANKOPOX MASILLA will be used, a bicomponent epoxy putty for joints of high strength, unalterable to water and high adhesive strength.
Then, to ensure the entire area an armed system should be applied, 228 LANKOIMPER FLEX and MALLA RENODECO. First one, is a bicomponent flexible waterproofing mortar in thin layer that allows light movements. The second one is a fiberglass mesh acrylic impregnated with a 5x5mm light, which offers excellent resistance to tensile strength and elongation.
After 48 hours of waterproofing, you should place new ceramic tiles with LANKOCOL FLEXIBLE, a powerful and deformable tile adhesive of mixed binders. Finally, to complete the process, it is necessary grouting the ceramic coating with LANKOLOR JUNTA FINA, a cemented, colored grout applied in thicknesses up to 6 mm and available in 25 colours.
With this solution Parex offers an option for professionals that take care of the whole process of waterproofing and tiling in shower trays in particular baths, as well as, for communities, in which case we have LANKOLOR EPOXI for placing and grouting ceramic tiles.